Now to prevent damage to the system the PC is restarted and you can again use your PC. But the error can come anytime and again the same process is followed. So without wasting any time let’s see how to actually Fix PAGE_FAULT_IN_NONPAGED_AREA Error with the help of below-listed troubleshooting guide.
Fix PAGE_FAULT_IN_NONPAGED_AREA Error
Make sure to create a restore point just in case something goes wrong.
Fix PAGE_FAULT_IN_NONPAGED_AREA Error Method 1: Run SFC and CHKDSK Method 2: Set Paging file to Automatic Method 3: Run System Restore Method 4: Run Memtest86+ Method 5: Run Driver Verifier Method 6: Run Automatic Repair
Method 1: Run SFC and CHKDSK
1.Press Windows Key + X then click on Command Prompt (Admin).
2.Now type the following in the cmd and hit enter:
3.Wait for the above process to finish and once done restart your PC. 4.Next, run CHKDSK from here Fix File System Errors with Check Disk Utility(CHKDSK). 5.Let the above process complete and again reboot your PC to save changes.
Method 2: Set Paging file to Automatic
1.Right-click on This PC or My Computer and select Properties.
2.Now from the left-hand menu click on Advanced System Settings.
3.Switch to the Advanced tab and then click Settings under Performance.
4.Again under Performance Options window switch to Advanced tab.
5.Click Change button under Virtual Memory. 6.Checkmark Automatically manage paging file size for all drives.
7.Click OK then click Apply followed by OK. 8.Reboot your PC to save changes and this should Fix PAGE_FAULT_IN_NONPAGED_AREA Error.
Method 3: Run System Restore
1.Press Windows Key + R and type”sysdm.cpl” then hit enter.
2.Select System Protection tab and choose System Restore.
3.Click Next and choose the desired System Restore point.
4.Follow the on-screen instruction to complete system restore. 5.After reboot, you may be able to Fix PAGE_FAULT_IN_NONPAGED_AREA Error.
Method 4: Run Memtest86+
Note: Before starting, make sure you have access to another PC as you will need to download and burn Memtest86+ to the disc or USB flash drive. 1.Connect a USB flash drive to your system. 2.Download and install Windows Memtest86 Auto-installer for USB Key. 3.Right-click on the image file which you just downloaded and select “Extract here” option. 4.Once extracted, open the folder and run the Memtest86+ USB Installer. 5.Choose your plugged in USB drive to burn the MemTest86 software (This will format your USB drive).
6.Once the above process is finished, insert the USB to the PC which is giving the PAGE_FAULT_IN_NONPAGED_AREA Error. 7.Restart your PC and make sure that boot from the USB flash drive is selected. 8.Memtest86 will begin testing for memory corruption in your system.
9.If you have passed all the test then you can be sure that your memory is working correctly. 10.If some of the steps were unsuccessful then Memtest86 will find memory corruption which means that your “PAGE_FAULT_IN_NONPAGED_AREA” is because of bad/corrupt memory. 11.In order to Fix PAGE_FAULT_IN_NONPAGED_AREA Error, you will need to replace your RAM if bad memory sectors are found.
Method 5: Run Driver Verifier
This method is only useful if you can log into your Windows normally not in the safe mode. Next, make sure to create a System Restore point.
Run Driver Verifier in order Fix PAGE_FAULT_IN_NONPAGED_AREA Error. This would eliminate any conflicting driver issues due which this error can occur.
Method 6: Run Automatic Repair
1.Insert the Windows 10 bootable installation DVD or Recovery Disc and restart your PC. 2.When prompted to Press any key to boot from CD or DVD, press any key to continue.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait till the Windows Automatic/Startup Repairs complete. 8.Restart to save changes. Also, read How to fix Automatic Repair couldn’t repair your PC. Recommended for you:
Fix Windows could not start the Print Spooler service on local computer Fix Windows 10 Creator Update fails to install How To Fix KERNEL_DATA_INPAGE_ERROR Fix CRITICAL_STRUCTURE_CORRUPTION Error
That’s it you have successfully Fix PAGE_FAULT_IN_NONPAGED_AREA Error but if you still have any questions regarding this post feel free to ask them in the comment’s section.
