Where To Buy
The KZ S2 is available on Indiegogo for $29.
Buy from INDIEGOGO Buy from LINSOUL
Introduction
After the release (and the quick withdrawal) of the KZ T1, I have been looking forward to KZ’s next iteration of the true wireless earbuds. KZ obviously knows how to create a budget earbuds with quality sound but their product line has been bugged by inconsistent build quality and inane user experience. So how does the KZ S2 fare? Let’s find out.
Case
Battery
Playtime: 10hrs Connector: USB-C Wireless Charging: No
With the bulky case, I was expecting the battery life to be longer. In hindsight, I should have known from its light weight. However, it still clocks in an impressive 10 hours playtime. The case uses USB-C jack for its charging connector which is really convenient for my work setup. Although there is no wireless charging capability, it was no surprise for me. It would be asking too much for the manufacturer to squeeze in this feature at such a budget price range.
UX
The case cover can be easily lifted with one finger. I find the magnetic grip on the earbuds to be slightly on the weaker end. The earbuds could be flick out with a good hard shake with an open cover. The case has no external light indicator. The light indicator is located inside the case where you need to lift the cover. The light indicator is a single LED light that shows different colors like red, yellow and green to reflect battery and charging status. The charging port is situated at the bottom of the case. That is bad UX for me. The case is lying awkwardly flat on its side while it is in charging mode. The earbuds are still retrievable at this state but it takes extra work to lift the case up before taking out the earbuds.
Design
The look of the case has the stereotypical “chi-fi” tws look – black matte surface with rounded corners. The plastic smooth texture of the case doesn’t feel premium and when you carry it on your palm, it feels really light and “hollow”. The build quality is decent but you can definitely see and feel it is more on the budget end. When you shake the case, you can hear the earbuds rattling in the case.
Portability
Weight (without earbuds): 55g (44g) Volume: 6cm X 4.2cm X 3.1cm = ~78.12 cm cu (~4.7672 in cu)
At 55g, the case is considered light. Removing the earbuds shaves off another 10g from it. However, the case takes up a bit of space at 78 cm cu. It protrudes evidently when you keep it into your jeans pocket. An upside to the rounded smooth case is that you can easily slide it into your pocket with no obstruction.
Earbuds
Battery
The battery on the earbuds can last 4hrs on single charge. The charging speed for the earbuds is slow, clocking at 30mins playtime with 15 mins of charging. That is the slowest among the TWS that I have tested.
UX
Control Mechanism: Touch No volume control Triple tap for “High Performance Mode” which decrease the lag time for audio/video sync Seamless transition from mono to dual
You control the KZ S2 via touch/tap. I prefer tactile controls (like those you see on Jabra 65t) over touch controls because I just haven’t seen anyone execute the touch controls well. It was either too sensitive or not sensitive at all. The touch controls on the KZ S2 did not impress me much either. The hit rate is passable. On average, the earbuds register 8 out of 10 of my touches. The issue is the delay feedback. It takes around a second for the action to take place after you tap the controls. The KZ S2 allows all the usual controls like playback, call controls and activation of voice assistant.
High Performance Mode
There is an interesting mode call the “High Performance Mode”. It is activated by triple-tapping either side of the earbuds. A voice feedback will echo “High Performance Mode” when it activated. You can switch it off by doing the same action and the voice feedback will echo “Standard Mode”. According to the manual, the high performance mode helps with audio-video latency especially for streaming videos and gaming. It supposed to mitigate the lag time problem that is common with Bluetooth wireless connection. I tested the “High Performance Mode” with the latency test on Youtube. In “Standard Mode”, there is a lag time that is visible to me. It is not very off but enough for me to discern. Once I switched over to “High Performance Mode”, the latency issue was hugely improved to the point where I’m satisfied with it. Pretty impressive.
Seamless transition from mono to dual
I dig the switching experience of mono usage back to dual earbuds usage. It is one of the better experiences I had with TWS. Most TWS will require you to put the current earbuds back into the case and then take them out to resume dual usage. But not the KZ S2. You just have to take the remaining earbud out of the case and it will auto-connect back to current earbud that you are using. Kudos to the Bluetooth SoC – Realtek 8763 chip that they used.
Design
The length of the S2’s nozzle is short and not intrusive. It fits comfortably in the ear canal. The earbuds weigh 5g each and it rests well on the ear without exerting additional pressure on it. The earbuds have a higher profile and it slightly sticks out of the ear. Combined with the ear tips that they provided, it felt a little loose on the ear. An additional pair of ear tips were provided but it was the same size as the pair on the earbuds. The body of the earbuds is mainly made from glossy plastic. The faceplate where the touch sensor is situated has a matte plastic surface. The earbuds feel well put together and the overall design of the earbuds has more curves than the KZ T1. However, I wish they have added some colorway to the S2, other than the overall black look, to give it more character. Strangely, KZ chose to print the driver configuration on the earbuds which looks kinda tacky to me.
Mic
In the press release, it was stated that the S2 has a CVC Noise Isolating Microphone. From the mic test conducted, we can hear the background sound is still being picked up quite audibly. But luckily the voice clarity is pretty decent. It wasn’t clear as day but you can separate the voice through the noise that it picked up. You can check out the mic test below:
Sound
Driver Configuration: 1 X 7mm Dynamic Driver, 1 X KZ 30095 Balanced Armature Frequency Response: 10Hz – 20kHz
Overall, I really the sound of the KZ S2. It is definitely punching well above its price range. The bass is strong without overwhelming the mids. The mids are not recessed nor forward. Lower mids sounded rich and have good body. The upper mids are, however, a little dry for my taste. The treble performs with good energy and not rolled off. You get a good amount of sparkle without sounding overly-bright.
Bass
The sub-bass reproduction is decently present. You can feel the rumble in songs like Why so serious? (from 3:25) by Hans Zimmer. The bass itself has a good amount of impact and quantity. Songs that are bass-heavy like Help by Borgore sounds really enjoyable on the KZ S2. On certain tracks with complex layering (Harder, Better, Faster, Stronger by Daft Punk), I do feel like the bass tends to stand out a bit much.
Mids
Despite the strong bass, the mids do not sound recessed nor is it too forward. This is not surprising given the multi-driver setup. Female vocals are under control without sounding shrieky. I do find that the lower mids have a better body and appearance compared to the upper mids which sound a tad dry for me.
Treble
The treble sounded great to me. The wild electronic violin distortion in Rude by Daniel Jang is well-controlled and yet not dulled-down. The top end has good energy and does sparkle without being overly bright.
Connectivity
Bluetooth Version: 5.0 Multi-point Connection: No Supported Audio Codec: SBC, AAC Bluetooth Audio SoC: Realtek 8763
Once connected to my Samsung S10, the Bluetooth connection defaulted to AAC. The pairing with my phone was smooth with no hiccups or surprises. Just find “KZ S2” and you can pair right away. Nothing fancy like the Cambridge Melomania 1. The connection is quite stable, with the dropouts being rather infrequent, probably once every hour of usage.
Waterproof
IPX Rating: IPX5
The KZ S2 has an IPX rating of IPX5. It is sweat-proof and suitable for workouts. I brought it for a quick run but I found that the fit could -be tighter. It felt a little loose on the ears when I was running with it. A larger ear tips would have given a better fit but unfortunately, KZ only provided one set of ear tips that are of similar size to the stock tips. It is a little poor on the accessories side, even for a budget TWS.
